Portable Stairs

AdjustaStairs – The Smart Solution for Portable Access Stairs

Portable Stairs

AdjustaStairs – The Smart Solution for Portable Access Stairs

Estimate the ADJUSTASTAIR you need:

Input the vertical height you need to access and compatible stairs will become enabled in the dropdown. Calculated run and approach angle will be displayed below.


Run:

Approach angle:

Made in the USA, and compliant with OSHA standards, these portable stairs are the perfect solution for easily and safely gaining temporary access to a variance of heights. These portable stairs have been used in a multitude of capacities: batter access, in and out of waterways, in staircase voids during construction, as well around trenches, excavations, and more.

Most workplace injuries and deaths occur due to a fall from height. And of those falls, most accidents happen because of an inadequate ladder. In Australia, businesses are putting products like AdjustaStairs at the centre of their safety program, to improve safety and efficiency on site.

Self-levelling portable stairs allow for a variance of pitch angles and aluminium constructions means a combination of strength and easy portability. And a 24″ width, allows a worker to ascend the stairs with a hand free for tools.

At 48″ in width, these AdjustaStairs allow two-way access and egress, so workers are not waiting at either end for another person to finish scaling the system. And a hefty weight rating of SWL 2.5kPa, and a big truss underneath, allows these multiple workers to be safely carrying tools with their spare hand.

  • 24" or 48" wide aluminium portable stairs
  • Portable stairs will self-level to suit the angle of the batter
  • Multiple stairs can be joined end to end to span any batter length
  • Top and mid landings can be constructed from Proscaf or custom aluminium fabricated
  • To fix, the portable stairs can be bolted into a timber sleeper or structural ply at the top, and pinned into the dirt at the bottom
  • Adjustability of the portable aluminium stairs makes them ideal for excavation access, where levels are constantly changing
  • Use AdjustaStairs instead of a ladder for your primary or secondary access
  • Much quicker to set up and move than a scaffold tower
SKU: 15AS0824
Steps: 8 Step, Width: 24" Wide
Suits a Height Range of 4’ - 6’4” with a weight capacity of 660 Lbs.
SKU: 15AS0836
Steps: 8 Step, Width: 36" Wide
Suits a Height Range of 4’ - 6’4” with a weight capacity of 660 Lbs.
SKU: 15AS0848
Steps: 8 Step, Width: 48" Wide
Suits a Height Range of 4’ - 6’4” with a weight capacity of 660 Lbs.
SKU: 15AS1024
Steps: 10 Step, Width: 24" Wide
Suits a Height Range of 5’ - 8’ with a weight capacity of 660 Lbs.
SKU: 15AS1036
Steps: 10 Step, Width: 36" Wide
Suits a Height Range of 5’ - 8’ with a weight capacity of 660 Lbs.
SKU: 15AS1048
Steps: 10 Step, Width: 48" Wide
Suits a Height Range of 5’ - 8’ with a weight capacity of 660 Lbs.
SKU: 15AS1224
Steps: 12 Step, Width: 24" Wide
Suits a Height Range of 6’ - 9’7” with a weight capacity of 660 Lbs.
SKU: 15AS1236
Steps: 12 Step, Width: 36" Wide
Suits a Height Range of 6’ - 9’7” with a weight capacity of 660 Lbs.
SKU: 15AS1248
Steps: 12 Step, Width: 48" Wide
Suits a Height Range of 6’ - 9’7” with a weight capacity of 660 Lbs.
SKU: 15AS1424
Steps: 14 Step, Width: 24" Wide
Suits a Height Range of 7’ - 11’2" with a weight capacity of 660 Lbs.
SKU: 15AS1436
Steps: 14 Step, Width: 36" Wide
Suits a Height Range of 7’ - 11’2" with a weight capacity of 660 Lbs.
SKU: 15AS1448
Steps: 14 Step, Width: 48" Wide
Suits a Height Range of 7’ - 11’2" with a weight capacity of 660 Lbs.
SKU: 15AS1624
Steps: 16 Step, Width: 24" Wide
Suits a Height Range of 8’ - 12’9” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS1636
    Steps: 16 Step, Width: 36" Wide
    Suits a Height Range of 8’ - 12’9” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS1648
    Steps: 16 Step, Width: 48" Wide
    Suits a Height Range of 8’ - 12’9” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS1824
    Steps: 18 Step, Width: 24" Wide
    Suits a Height Range of 9’ - 14’4” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS1836
    Steps: 18 Step, Width: 36" Wide
    Suits a Height Range of 9’ - 14’4” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS1848
    Steps: 18 Step, Width: 48" Wide
    Suits a Height Range of 9’ - 14’4” with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS2024
    Steps: 20 Step, Width: 24" Wide
    Suits a Height Range of 10’ - 16’ with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS2036
    Steps: 20 Step, Width: 36" Wide
    Suits a Height Range of 10’ - 16’ with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • SKU: 15AS2048
    Steps: 20 Step, Width: 48" Wide
    Suits a Height Range of 10’ - 16’ with a weight capacity of 660 Lbs.
  • H-Brace recommended for all 16-20 Step AdjustaStairs.
  • This accessory eliminates any bounce you may experience and increases the capacity to 1100 lbs.
  • Estimate the ADJUSTASTAIR you need:

    Input the vertical height you need to access and compatible stairs will become enabled in the dropdown. Calculated run and approach angle will be displayed below.


    Run:

    Approach angle:

    Made in the USA, and compliant with OSHA standards, these portable stairs are the perfect solution for easily and safely gaining temporary access to a variance of heights. These portable stairs have been used in a multitude of capacities: batter access, in and out of waterways, in staircase voids during construction, as well around trenches, excavations, and more.

    Most workplace injuries and deaths occur due to a fall from height. And of those falls, most accidents happen because of an inadequate ladder. In Australia, businesses are putting products like AdjustaStairs at the centre of their safety program, to improve safety and efficiency on site.

    Self-levelling portable stairs allow for a variance of pitch angles and aluminium constructions means a combination of strength and easy portability. And a 24″ width, allows a worker to ascend the stairs with a hand free for tools.

    At 48″ in width, these AdjustaStairs allow two-way access and egress, so workers are not waiting at either end for another person to finish scaling the system. And a hefty weight rating of SWL 2.5kPa, and a big truss underneath, allows these multiple workers to be safely carrying tools with their spare hand.

    Your solution is just a click away

    The Solution Selector will recommend the best access solution for your needs in 30 seconds.

    The SafeSmart Difference